Do it yourself
Frequently asked questions about cars and motorcycles

Dismantling the Wiper Motor of the Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 2 - Years 2005-2015

In today's video, we will see the main instructions for dismantling and replacing the wiper motor of the Suzuki Samurai, following these simple steps. First, open the bonnet and start by removing the wiper arms by unscrewing the nuts at the base; then remove the plastic cover to access the wiper motor, as shown in the video. At this point, unscrew the screws of the wiper mechanism, unscrewing the screws of the motor to remove it (disconnecting the electrical connector); then reassemble everything!

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Suzuki Grand Vitara (1999-2005 / MK 1) This guide shows how to dismantle the starter motor on a Suzuki Grand Vitara Mk1; this procedure is also applicable to the Suzuki XL-7. The first ste…
Suzuki Grand Vitara (2005-2015 / MK 2) Today's main information will show us how to disassemble and replace the starter motor of the Suzuki Grand Vitara. First, we lift the vehicle and loc…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos