Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on the Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Starter motor

See other generations:
Video tutorial

Today's main information will show you how to remove and replace the starter motor on the Suzuki Grand Vitara. First, lift the vehicle and locate the starter motor, situated next to the oil sump; then unscrew its mounting bolts and disconnect the electrical connector to remove it, as shown in the video.

At this point, install the new original starter motor, reconnect the electrical connection, and check its operation when starting the engine; secure it properly before lowering the vehicle from the lift!


Updated on 25 October 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor in a Suzuki Grand Vitara?
How to Replace the Starter Motor in a Suzuki Grand Vitara?
Suzuki Grand Vitara (2005-2015 / MK 2) To replace the starter motor in a Suzuki Grand Vitara, open the bonnet to gain access to the components inside the engine bay: on the left side, you …
How to Dismantle the Starter Motor on a Suzuki Grand Vitara Mk1
How to Dismantle the Starter Motor on a Suzuki Grand Vitara Mk1
Suzuki Grand Vitara (1999-2005 / MK 1) This guide shows how to dismantle the starter motor on a Suzuki Grand Vitara Mk1; this procedure is also applicable to the Suzuki XL-7. The first ste…
How to replace the timing belt on a Suzuki Grand Vitara?
How to replace the timing belt on a Suzuki Grand Vitara?
Suzuki Grand Vitara (2005-2015 / MK 2) To replace the timing belt on a Suzuki Grand Vitara, open the bonnet to access the components located inside the engine compartment: on the left side…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos