Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Suzuki
  4. :
  5. Grand Vitara
  6. : Starter motor

Suzuki Grand Vitara - Starter motor

Suzuki Grand Vitara (2005-2015 / MK 2)
How do you replace the starter motor on the Suzuki Grand Vitara?

In order to replace the starter motor of the Suzuki Grand Vitara, you need to open the bonnet, so that you can access the components located inside the engine …read all…
Posted on 24 November 2022 by ScegliAuto
Suzuki Grand Vitara (1999-2005 / MK 1)
How to disassemble the starter motor of Suzuki Grand Vitara Mk1

The guide shows how to disassemble the Suzuki Grand Vitara Mk1 starter motor; this procedure is equally applicable to the Suzuki XL-7. The first operation to …read all…
Posted on 30 July 2022 by ScegliAuto
Suzuki Grand Vitara (2005-2015 / MK 2)
How to remove the starter motor on Suzuki Gran Vitara

How to remove the starter motor on a Suzuki Gran Vitara? We lift the car with a column bridge and put it in safety. To begin: with a socket wrench we …read all…
Posted on 6 November 2023 by ScegliAuto

Alternator (4) Loudspeaker (2) Shock absorbers (2) Antenna (2) Battery (3) Arm (1) Spark plugs (1) Glow plugs (1) Key (3) Timing belt (8) V-belt (6) Checks and maintenance (15) Differential (2) Headlight (1) Tail light (1) Fog lights (1) Air filter (1) Cabin air filter (6) Petrol filter (1) Diesel filter (3) Oil filter (3) Hand brake (4) Clutch (3) Light bulb (2) Headlight bulb (5) Rear light bulb (2) Antifreeze liquid (1) License plate light (1) Handle (1) Engine (1) Starter motor (3) Gear oil (1) Engine oil (3) Door panel (4) Rear bumper (1) Brake pads (2) Gear Shift Knob (1) Fuel pump (1) Instrument cluster (4) Radiator (1) Fuse box (10) Seat (2) Outside rearview mirror (2) Drums and shoes (1) Windscreen wipers (1) EGR valve (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos