Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Starter Motor on a Suzuki Grand Vitara Mk1

Model: Suzuki Grand Vitara MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Starter motor

See other generations:
Video tutorial

This guide shows how to dismantle the starter motor on a Suzuki Grand Vitara Mk1; this procedure is also applicable to the Suzuki XL-7. The first step is to remove the engine air filter box and the exhaust manifold shield. The starter motor is located at the rear of the engine, towards the bottom of the chassis.

At this point, disconnect the electrical cables and then remove the two bolts securing the motor. It is advisable to access the engine bay from underneath the vehicle to perform this last operation.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

Replacing the Starter Motor on the Suzuki Grand Vitara
Replacing the Starter Motor on the Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) Today's main information will show you how to remove and replace the starter motor on the Suzuki Grand Vitara. First, lift the vehicle and locate the…
How to Replace the Starter Motor in a Suzuki Grand Vitara?
How to Replace the Starter Motor in a Suzuki Grand Vitara?
Suzuki Grand Vitara (2005-2015 / MK 2) To replace the starter motor in a Suzuki Grand Vitara, open the bonnet to gain access to the components inside the engine bay: on the left side, you …
How to Remove the Clutch from a Suzuki Grand Vitara
How to Remove the Clutch from a Suzuki Grand Vitara
Suzuki Grand Vitara (1999-2005 / MK 1) Begin by lifting your Suzuki Grand Vitara, then remove the driveshaft, the lower cover supporting the gearbox, and anything else obstructing the extr…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos