Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Grand Vitara
    4. : Brake pads

Suzuki Grand Vitara - Brake pads

Brake Pads Suzuki Grand Vitara (2005-2015 / mk 2)

Suzuki Grand Vitara (2005-2015 / MK 2)
How to Replace the Front Brake Pads on a Suzuki Grand Vitara
To replace the front brake pads on a Suzuki Grand Vitara, lift the vehicle with a jack or ramp so that the corresponding front wheel is off the ground. Once …Read all…
Posted on 20 July 2026 by ScegliAuto
Suzuki Grand Vitara (2005-2015 / MK 2)
How to Replace the Brake Pads on the Suzuki Grand Vitara
First, you need to remove the wheel on which you will replace the brake pads. Lift your vehicle on appropriate jack stands. Now, remove the bolts on the back …Read all…
Posted on 8 March 2026 by ScegliAuto
Alternator (5) Speaker (3) Shocks (2) Antenna (2) Car stereo (1) Battery (4) Control arm (1) Spark plugs (1) Glow plugs (1) Key (4) Timing belt (13) V-belt (6) Onboard computer (1) Checks and maintenance (4) Bearing (1) Differential (2) Headlight (1) Tail light (2) Fog lights (1) Air filter (1) Cabin air filter (7) Fuel filter (1) Diesel fuel filter (5) Oil filter (3) Parking brake (4) Clutch (3) Light bulb (2) Headlight bulb (6) Tail light bulb (2) Antifreeze coolant (1) License plate light (1) Handle (1) Engine (1) Starter motor (4) Transmission fluid (1) Engine oil (3) Clock (6) Door trim panel (4) Rear bumper (1) Brake pads (2) Shift knob (2) Fuel pump (2) Instrument cluster (1) Radiator (1) Fuse box (23) Seat (2) Side mirror (2) Warning light – error code (1) (4) Tire pressure warning light (3) Service warning light (10) Brake drums and shoes (1) Windshield wipers (1) EGR valve (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos