Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Grand Vitara
    4. : License plate light

Suzuki Grand Vitara - License plate light

License Plate Light Suzuki Grand Vitara (1999-2005 / mk 1)

Suzuki Grand Vitara (1999-2005 / MK 1)
Replacing the Number Plate Bulbs on a Suzuki Grand Vitara
Replace the number plate bulbs on a Grand Vitara. Locate the light unit above the number plate and detach the transparent plastic cover until you can see the …Read all…
Posted on 26 April 2026 by ScegliAuto
Alternator (5) Speaker (3) Shocks (2) Antenna (2) Car stereo (1) Battery (4) Control arm (1) Spark plugs (1) Glow plugs (1) Key (4) Timing belt (13) V-belt (6) Onboard computer (1) Checks and maintenance (4) Bearing (1) Differential (2) Headlight (1) Tail light (2) Fog lights (1) Air filter (1) Cabin air filter (7) Fuel filter (1) Diesel fuel filter (5) Oil filter (3) Parking brake (4) Clutch (3) Light bulb (2) Headlight bulb (6) Tail light bulb (2) Antifreeze coolant (1) License plate light (1) Handle (1) Engine (1) Starter motor (4) Transmission fluid (1) Engine oil (3) Clock (6) Door trim panel (4) Rear bumper (1) Brake pads (2) Shift knob (2) Fuel pump (2) Instrument cluster (1) Radiator (1) Fuse box (23) Seat (2) Side mirror (2) Warning light – error code (1) Tire pressure warning light (7) Service warning light (11) Brake drums and shoes (1) Windshield wipers (1) EGR valve (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos