Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Number Plate Bulbs on a Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 1 - Years 1999-2005
Part: License plate light

Replace the number plate bulbs on a Grand Vitara. Locate the light unit above the number plate and detach the transparent plastic cover until you can see the bulb. Once the transparent cover is removed, extract the bulb using your fingers. Fit the new bulb (same size and voltage) into the holder, then reattach the transparent cover of the light unit. Replace all damaged bulbs. Finally, test the operation of the number plate light on the Suzuki.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Fog Light Bulbs on a Suzuki Grand Vitara
Replace the Fog Light Bulbs on a Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) Replacing the fog light bulbs on a Grand Vitara? Let’s see how to do it. Start by removing the plastic cover at the back of the bumper. Access the si…
Replacing the Headlight Bulbs on a Suzuki Grand Vitara
Replacing the Headlight Bulbs on a Suzuki Grand Vitara
Suzuki Grand Vitara (1999-2005 / MK 1) Replace the bulbs in the front headlight of the Grand Vitara, here's how. Open the bonnet, and use a screwdriver to remove the securing cap located a…
Replacing the Rear Light Bulb on a Suzuki Grand Vitara
Replacing the Rear Light Bulb on a Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) Replacing the rear light bulb on a Grand Vitara? Remove the rear light to replace the bulbs. Lift the tailgate of the boot, and use a screwdriver to …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos