Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Fog Light Bulbs on a Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fog lights

See other generations:
Video tutorial

Replacing the fog light bulbs on a Grand Vitara? Let’s see how to do it. Start by removing the plastic cover at the back of the bumper. Access the side fog light located in the bumper.

After removing the bulb holder, take out the damaged bulb and fit a new one (same size and voltage). Refit the cover behind the fog light of the vehicle.

Perform this replacement on the front lights to ensure consistent lighting. Turn on the operating switches and test the lights.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Replacing the Number Plate Bulbs on a Suzuki Grand Vitara
Replacing the Number Plate Bulbs on a Suzuki Grand Vitara
Suzuki Grand Vitara (1999-2005 / MK 1) Replace the number plate bulbs on a Grand Vitara. Locate the light unit above the number plate and detach the transparent plastic cover until you can…
Replacing the Headlight Bulbs on a Suzuki Grand Vitara
Replacing the Headlight Bulbs on a Suzuki Grand Vitara
Suzuki Grand Vitara (1999-2005 / MK 1) Replace the bulbs in the front headlight of the Grand Vitara, here's how. Open the bonnet, and use a screwdriver to remove the securing cap located a…
Replacing the Rear Light Bulb on a Suzuki Grand Vitara
Replacing the Rear Light Bulb on a Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) Replacing the rear light bulb on a Grand Vitara? Remove the rear light to replace the bulbs. Lift the tailgate of the boot, and use a screwdriver to …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos