Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulb on a Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light bulb

See other generations:
Video tutorial

Replacing the rear light bulb on a Grand Vitara? Remove the rear light to replace the bulbs. Lift the tailgate of the boot, and use a screwdriver to unscrew the securing screws located at the side of the right or left light.

Remove the rear light from its housing once all screws are removed (disconnect the power connectors). Replace all damaged bulbs with new ones (same size and voltage).

Secure the light with the associated screws. Test the correct operation of the previously installed bulbs: turn on the instrument panel and operate the control levers.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Suzuki Grand Vitara: Rear Headlamp Bulb Replacement
Suzuki Grand Vitara: Rear Headlamp Bulb Replacement
Suzuki Grand Vitara (2005-2015 / MK 2) To replace the rear headlamp bulb on the Suzuki Grand Vitara, first position the vehicle on a flat surface or on a ramp to work safely. Now, use the …
How to Replace the Rear Light Bulbs of the Suzuki Grand Vitara 2
How to Replace the Rear Light Bulbs of the Suzuki Grand Vitara 2
Suzuki Grand Vitara (2005-2015 / MK 2) Today, in this video tutorial, you will see how to dismantle and replace the bulbs of the rear light, particularly the stop light, of the Suzuki Gran…
How to Replace the Rear Bulbs on the Suzuki Grand Vitara?
How to Replace the Rear Bulbs on the Suzuki Grand Vitara?
Suzuki Grand Vitara (2015-2024 / MK 3) To replace one or more bulbs in the rear light of the Suzuki Grand Vitara, first open the boot. This will allow access to the two screws holding the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos