Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 2 - Years 2005-2015
Part: Brake pads

To replace the front brake pads on a Suzuki Grand Vitara, lift the vehicle with a jack or ramp so that the corresponding front wheel is off the ground. Once the wheel is removed after loosening the fixing bolts, access the brake caliper, which must be freed from its screws. This will allow you to detach the caliper and remove the pads inside, replacing them with new spare parts; after replacement, reassemble all the parts that were previously removed.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear brake shoes on a Suzuki Grand Vitara?
How to replace the rear brake shoes on a Suzuki Grand Vitara?
Suzuki Grand Vitara (2005-2015 / MK 2) To replace the rear brake shoes on a Suzuki Grand Vitara, first loosen the bolts of the rear wheel and remove it. Next, loosen the two fixing bolts l…
How to Replace the Brake Pads on the Suzuki Grand Vitara
How to Replace the Brake Pads on the Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) First, you need to remove the wheel on which you will replace the brake pads. Lift your vehicle on appropriate jack stands. Now, remove the bolts on …
How to Replace the Rear Brake Shoes on a Suzuki Grand Vitara
How to Replace the Rear Brake Shoes on a Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) In this brief and simple guide, you will learn how to remove and replace the rear brake shoes on a Suzuki Grand Vitara. The rear shoes should be repl…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos