Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Right Indicator Bulb

Model: Suzuki Ignis MK 2 - Years 2003-2008
Part: Side marker bulb

In this video, you can see the replacement of the right side indicator bulb of the front light cluster on a Suzuki Ignis. The procedure is quite simple as you do not need to dismantle the entire light cluster to replace the blown bulb. Open the bonnet and reach behind with your hand to the bulb holder that needs replacing. Make a slight rotation (from left to right) of the bulb holder and pull it out from its seat. Once you have replaced the blown bulb, reinsert the bulb holder and bulb into the seat and perform the opposite rotational movement to that used for removal (from right to left).

Updated on 11 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of Side Indicator Bulb
Suzuki Ignis (2003-2008 / MK 2) If you want to replace the bulb of the side indicator located on the right front headlamp of your Suzuki Ignis, here’s how to do it. Open the bonnet.…
How to Remove the Headlamp Bulbs on a Suzuki Ignis
How to Remove the Headlamp Bulbs on a Suzuki Ignis
Suzuki Ignis (2003-2008 / MK 2) How to remove the headlamp bulbs on a Suzuki Ignis? Let's see how to replace the bulbs. Open the front bonnet by pulling the plastic lever located at…
How to Remove the Fog Light Cover on the Suzuki Ignis
How to Remove the Fog Light Cover on the Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) Let's see how to remove the fog light cover on the Suzuki Ignis: open the door and locate the plastic clip on the bumper, just behind the fog light c…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos