Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS of the Suzuki Wagon R

Model: Suzuki Wagon R MK 3 - Years 2003-2008
Part: Tire pressure warning light

After checking the tyre pressures and adjusting them according to the manufacturer's guidelines, proceed to reset the warning light. The reset is very simple to perform. Start by turning on the vehicle's instrument cluster and press the designated button located under the dashboard on the driver's side. The button is positioned near the OBD port and should be pressed for about three seconds. After three seconds, you will notice that the warning light, which was previously illuminated on the dashboard, will turn off. At this point, switch off the instrument cluster to confirm and restart the car to ensure the procedure has been correctly executed.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to activate and deactivate the alarm system of the Suzuki Wagon-R.
How to activate and deactivate the alarm system of the Suzuki Wagon-R.
Suzuki Wagon R (2003-2008 / MK 3) Let's see in this video how to activate and deactivate the alarm system on the Suzuki Wagon-R: we put the key in the ignition, but without starting t…
How to replace the rear brake pads of the Suzuki Wagon R
How to replace the rear brake pads of the Suzuki Wagon R
Suzuki Wagon R (2003-2008 / MK 3) Below we will see the main instructions that will allow us to disassemble and replace the rear brake shoes of the drum brakes of the Suzuki Wagon R. …
Where are the fuses located in the Suzuki Wagon R?
Suzuki Wagon R (2003-2008 / MK 3) The fuses of the Suzuki Wagon R are contained inside the appropriate fuse boxes that are installed on the vehicle: in this type of car it is possible…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos