Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Vitara
    4. : Headlight

Suzuki Vitara - Headlight

Headlight Suzuki Vitara (2005-2015 / jt)

Suzuki Vitara (2005-2015 / JT)
How do you adjust the headlights of the Suzuki Vitara?
In order to adjust the headlights of the Suzuki Vitara, you need to open the hood so that you can access the components located at the top of the headlight …Read all…
Posted on 30 August 2024 by ScegliAuto
Suzuki Vitara (2005-2015 / JT)
How to Remove the Rear Light on Suzuki Vitara
Is the rear light on your Suzuki Vitara due for replacement? Here’s how to remove it from the back of the car. Open the boot lid, unscrew the securing screws …Read all…
Posted on 7 April 2026 by ScegliAuto
Alternator (1) Antenna (2) Car stereo (5) Roof rack bars (1) Battery (3) Transmission (1) Body (1) Key (17) Timing belt (5) V-belt (1) Onboard computer (5) Checks and maintenance (16) Throttle body (1) Dashboard (1) MAF sensor (1) Differential (1) Headlight (2) Tail light (2) Air filter (1) Cabin air filter (9) Fuel filter (1) Diesel fuel filter (4) Oil filter (1) Parking brake (3) Clutch (1) Light bulb (1) Side marker bulb (2) Headlight bulb (2) Handle (2) Engine oil (4) Clock (35) Door trim panel (9) Shift knob (1) Fuel pump (2) Instrument cluster (7) Wheel (1) Fuse box (19) Axle shaft (1) Side mirror (1) Warning light – error code (14) (11) Tire pressure warning light (8) Service warning light (57) Fuel cap (2) Windshield wipers (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos