Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Vitara
    4. : Timing belt

Suzuki Vitara - Timing belt

Suzuki Vitara (1988-1998 / TA, ET, MK 1)
How do you replace the timing belt of the Suzuki Vitara?
In order to replace the timing belt of the Suzuki Vitara, you need to loosen the screws that secure the panel in the front of the engine block. Once the screws …read all…
Posted on 21 April 2024 by ScegliAuto
Suzuki Vitara (2005-2015 / JT)
How to remove timing belt on Suzuki Vitara
How to replace the timing belt and water pump on a Suzuki Vitara? Let's open the bonnet and put it in safety. With the socket wrench we remove the …read all…
Posted on 7 November 2023 by ScegliAuto
Suzuki Vitara (1988-1998 / TA, ET, MK 1)
Removing the timing belt on a Suzuki Vitara
We see in this video the disassembly with replacement of the timing belt and the water pump on a Suzuki Vitara. Let's open the bonnet and lift it, let's put it …read all…
Posted on 11 October 2023 by ScegliAuto
Alternator (1) Antenna (1) Car stereo (3) Roof Rack Bars (1) Battery (3) Gearbox (1) Bodywork (1) Key (9) Timing belt (3) V-belt (1) -board computer (15) Checks and maintenance (52) Headlight (1) Tail light (2) Air filter (1) Cabin air filter (5) Diesel filter (3) Oil filter (1) Hand brake (3) Clutch (1) Side turn signal light bulb (1) Headlight bulb (2) Handle (2) Engine oil (8) Door panel (7) Tires (1) Fuel pump (2) Instrument cluster (19) Wheel (1) Fuse box (10) Drive shaft (1) Outside rearview mirror (1) Windscreen wipers (2)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos