Do it yourself
Frequently asked questions about cars and motorcycles
In this short video, see how to carry out routine maintenance by replacing the engine oil and cleaning the small oil filter on a Sym Symphony SR 150 scooter. First, position the scooter on the centre stand and remove the oil drain bolt located under the casing, allowing the oil to drain into a container for about ten minutes. Then, remove the small filter found inside the hole, cleaning it with a suitable degreaser. Finally, pour the new engine oil through the fill hole, filling it to the maximum level!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Symphony 151 To service a Sym Symphony SR 150, follow all the operations shown in the video: clean the air filter with a blast of compressed air after removing th…
Symphony 151 In this video, learn how to remove and replace the front brake pads on a Sym Symphony ST 150 scooter, as well as the 125 and 200 models. First, posit…
Symphony 151 In this video tutorial, learn how to remove and replace the rear brake pads on a Sym Symphony 150 scooter. First, position the scooter on the centre …

How to Change the Engine Oil on a Ducati Hypermotard?

You can change the engine oil on a Ducati Hypermotard by loosening the drain plug located at the central lower part of the bike: once the plug is unscrewed, you can let the used oil flow completely into a container placed underneath. Once the plug has been removed, you can proceed by sliding the oil filter out of its seat to insert the new one; at this point, you can continue with the top-up, pouring the necessary amount of oil through the breather on the left side of the bike.

Watch the video!


by ScegliAuto

More videos