Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To reset the Oil Check light on the Sym Mio, you need to turn on the instrument panel by inserting the ignition key into the ignition switch: once the panel is turned on, you will need to repeatedly press the MODE button until the partial odometer is displayed. Once this is shown, you can hold down the SET button for a few seconds until the light disappears completely from the instrument panel. This way you can complete the procedure by turning off the instrument panel by turning the key.

Posted on 13 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Sym Mio
How to Reset the "Service" Light on a Sym Mio
Mio Before you start, sit on the seat of your Sym Mio. Activate the instrument panel by turning the key in the ignition. Then, press the right button on …
How to replace the saddle of the Sym Mio
How to replace the saddle of the Sym Mio
Mio The instructions in this guide will show us how to disassemble and replace the seat of the Sym Mio scooter, in simple and quick steps. First of all, …
How to replace the starter motor of the Sym Mio
How to replace the starter motor of the Sym Mio
Mio Today's guide will show us the steps that will allow us to disassemble and replace the starter motor of the Sym Mio scooter. First, we put the scoote…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos