Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sym Mio
Part: Suspension system

This video shows how to remove and replace the rear suspension on a Sym Mio scooter. First, remove the plastic engine cover and then take off the scooter fairing by unscrewing the fastening screws found on the footboard and the side of the fairing. Next, use a spanner to undo the upper bolt of the suspension to detach it; also undo the lower anchoring bolt, thus removing the suspension. Finally, replace it with the new one, applying the reverse procedure.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Mio To replace the rear shock absorber on the Sym Mio, loosen the screws securing the air filter box located on the left side of the bike, near the rear …
Mio In this video tutorial, you will find instructions to remove the rear wheel from a Sym Mio 50cc scooter. First, position the scooter on the centre st…
Mio In order to replace the variator of the Sym Mio scooter, you need to loosen the screws that secure the transmission cover panel: this will be located…

How to Remove the Handlebar Ends and Mirrors on the Royal Enfield Interceptor 650

This guide shows how to remove the handlebar ends and replace the mirrors on the Royal Enfield Interceptor 650. The first step is to unscrew the bolt holding the handlebar end in place using an Allen key. Once the bolt is removed, carefully pull out the finishing block. Take the replacement finishing block and, after loosening the fixing hex bolt, insert it into position and tighten it. Install the mirrors at the end of the element and tighten the mirror fixing bolt. Make the necessary adjustments to ensure proper rear visibility.

Watch the video!


by ScegliAuto

More videos