Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Shock Absorber on a Sym Mio

Model: Sym Mio
Part: Shocks

Video tutorial

To replace the rear shock absorber on the Sym Mio, loosen the screws securing the air filter box located on the left side of the bike, near the rear wheel. Once the box is removed, you can access the bolt that secures the shock absorber at the bottom, which needs to be loosened.

By loosening the bolt of the shock absorber at the top, you can slide it out of its housing to replace it with a new spare part. This should be properly secured with its screws so that the air filter box can be reinstalled.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Mio This video shows how to remove and replace the rear suspension on a Sym Mio scooter. First, remove the plastic engine cover and then take off the sco…
Mio To replace the rear indicator bulb on the Sym Mio, you need to loosen the screws that secure the rear fairing of the motorcycle: to do this, you will…
Mio To replace the belt on the Sym Mio, you need to loosen the screws that secure the cover of the casing near the rear wheel, beneath which the transmis…

How to Replace the Front Brake Pads of the Yamaha Tmax 530

This guide provides instructions on how to remove and replace the front brake pads of the Yamaha Tmax 530. First, place your motorcycle on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc. Then, use pliers to remove the front brake pads, as shown in the video. Clean the caliper from any residual dirt and apply pressure to the piston. Install the new high-quality brake pads, following the video tutorial until the end!

Watch the video!


by ScegliAuto

More videos