Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Tata Nexon?

Model: Tata Nexon MK 1 - Years 2017-2024
Part: Cabin air filter

Replacing the cabin filter in the Tata Nexon is a very simple and quick task. First, sit in the passenger seat. Then, remove the entire panel located at the junction between the dashboard and the center console. Once done, locate the long rectangular cover in front of the partition wall, unscrew the single fastening screw, and open it. At this point, you can pull out the old filter, clean the inside of the housing of any debris, and insert the replacement in the correct orientation.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cabin Filter in the Tata Nexon?
How to Remove the Cabin Filter in the Tata Nexon?
Tata Nexon (2017-2024 / MK 1) In this tutorial, you will see how to remove the cabin filter in the Tata Nexon, a very simple and quick operation to perform if you need to clean or…
Where is the fuse box of the Tata Nexon located?
Where is the fuse box of the Tata Nexon located?
Tata Nexon (2017-2024 / MK 1) If you don't know where the box containing all the fuses of your Tata Nexon is located, don't worry because in the following guide you will find the …
How to Replace the Shift Knob on the Tata Nexon
How to Replace the Shift Knob on the Tata Nexon
Tata Nexon (2017-2024 / MK 1) To DIY replace the shift knob on your Tata Nexon, follow this procedure. First, get inside the vehicle, reach the driver's seat, and ensure that your…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos