Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on the TM Racing EN 300?

Model: Tm Racing En 300
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the TM Racing EN 300, loosen the two screws that secure the exhaust to the rear of the bike, located in the designated slots on the exhaust. Once these screws are removed, you can loosen the clamp that connects the exhaust to the remaining part of the exhaust system, allowing it to be completely removed.

Next, unscrew the bolts at the base of the exhaust, detaching it completely from the pipe and inserting a new one; finally, reconnect the pipe to the remaining part of the exhaust system.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a TM Racing EN 300?
How to Replace the Exhaust on a TM Racing EN 300?
En 300 To replace the exhaust on the TM Racing EN 300, loosen the screws securing the panel on the right side of the bike, next to the rear mudguard: once t…
How to remove the engine from the TM Racing EN 300?
How to remove the engine from the TM Racing EN 300?
En 300 To remove the engine of the TM Racing EN 300 from its housing, you will need to remove some bulky components, such as the seat, the rear mudguard, an…
How do you disassemble the engine of the TM Racing EN 300?
How do you disassemble the engine of the TM Racing EN 300?
En 300 In order to disassemble the engine of the TM Racing EN 300, you need to loosen the screws that fix the engine block to its housing in the center of t…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos