Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Tm Racing En 300
Part: Engine

In order to disassemble the engine of the TM Racing EN 300, you need to loosen the screws that fix the engine block to its housing in the center of the frame: once the screws have been loosened, you can disconnect all the connectors and also remove the intake and exhaust pipes. At this point, you can unscrew the screws that fix the cylinder to its top, so that you can remove the piston from its connecting rod; the latter can now be detached from the crankshaft so that you can replace all the other internal components.

Posted on 12 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the TM Racing EN 300?
How do you disassemble the engine of the TM Racing EN 300?
En 300 On the TM Racing EN 300 it will be possible to disassemble the engine by removing the block from the corresponding housing compartment: to do this, i…
How to remove the engine from the TM Racing EN 300?
How to remove the engine from the TM Racing EN 300?
En 300 To remove the engine of the TM Racing EN 300 from its housing, you will need to remove some bulky components, such as the seat, the rear mudguard, an…
How to Dismantle the Engine of the TM Racing EN 300
How to Dismantle the Engine of the TM Racing EN 300
En 300 To dismantle the engine of the TM Racing EN 300, you need to remove the engine block from its housing. To do this, unscrew all the bolts securing it …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos