Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Toyota Rush - Key

Toyota Rush (2017-2024 / J300, F800)
How to replace the battery of the Toyota Rush key.
In order to quickly and independently replace the battery located inside the key of your Toyota Rush Mk2, you only need a common flat-head screwdriver and a …read all…
Posted on 9 April 2023 by ScegliAuto
Toyota Rush (2006-2017 / J200, F700)
How to replace the battery in the Toyota Rush key
In our new mini guide dedicated to your Toyota Rush first series (year 2006-2017) we will find out what are the various steps to carry out if you want to …read all…
Posted on 16 May 2023 by ScegliAuto
Toyota Rush (2017-2024 / J300, F800)
How to replace the Toyota Rush remote control battery?
In this tutorial we can see how to replace the remote control battery of the Toyota Rush. For this simple and quick operation, we will need a spare CR2032 type …read all…
Posted on 15 April 2023 by ScegliAuto
Toyota Rush (2017-2024 / J300, F800)
How to replace the battery on the Toyota Rush key
If we need to replace the remote control key battery of this vehicle model, take a look at the images in the video and we can read the instructions below. …read all…
Posted on 10 June 2022 by ScegliAuto
Shock absorbers (1) Car stereo (1) Spark plugs (2) Key (4) Checks and maintenance (2) Headlight (1) Fog lights (1) Air filter (2) Cabin air filter (5) Grille (3) Brake pads (2) Wheel (3) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos