Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Toyota Rush
    4. : Cabin air filter

Toyota Rush - Cabin air filter

Toyota Rush (2017-2024 / J300, F800)
How to replace the cabin air filter on Toyota Rush
If we intend to replace the cabin air filter on this car, we will find the methods to follow on the video and in the description below. After sitting on the …read all…
Posted on 15 May 2023 by ScegliAuto
Toyota Rush (2017-2024 / J300, F800)
How do you replace the cabin filter on the Toyota Rush?
In order to replace the cabin filter on the Toyota Rush, you need to go and open the glove box located on the front passenger side, so that you can release the …read all…
Posted on 20 December 2022 by ScegliAuto
Toyota Rush (2017-2024 / J300, F800)
How to replace the cabin filter in Toyota Rush?
In this tutorial we can see how to replace the cabin filter in Toyota Rush, a very simple and fast operation. First we open the glove compartment drawer on the …read all…
Posted on 21 November 2022 by ScegliAuto
Toyota Rush (2017-2024 / J300, F800)
How to replace the Toyota Rush cabin air filter
Let's see in this short guide how to replace the Toyota Rush cabin air filter. First of all we get on board the car, on the passenger side, and begin to …read all…
Posted on 17 May 2024 by ScegliAuto
Toyota Rush (2017-2024 / J300, F800)
Toyota Rush cabin air filter replacement
In this video tutorial we will see how to remove and replace the Toyota Rush cabin air filter, following these simple and quick steps. First we get on board …read all…
Posted on 28 April 2024 by ScegliAuto
Shock absorbers (1) Car stereo (1) Spark plugs (2) Key (4) Checks and maintenance (2) Headlight (1) Fog lights (1) Air filter (2) Cabin air filter (5) Grille (3) Brake pads (2) Wheel (3) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos