Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the Toyota Rush?

Model: Toyota Rush J300, F800 - Years 2017-2024
Part: Cabin air filter

In this tutorial, see how to replace the cabin air filter in the Toyota Rush, a very simple and quick operation. First, open the glove compartment on the passenger side, then release the two pins from the dashboard by pressing both sides inward. Next, lay the glove compartment on the ground and open the long rectangular cover, if present. If there is no cover, you will need to cut the panel of the housing around the perimeter. Once this is done, you can remove the filter, insert the replacement, and cover the opening with a separately purchased cover.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on the Toyota Rush?
How to Replace the Cabin Filter on the Toyota Rush?
Toyota Rush (2017-2024 / J300, F800) To replace the cabin filter on the Toyota Rush, open the glove compartment located on the passenger side to release the side retaining pins inside. O…
How to Replace the Spark Plugs on the Toyota Rush?
How to Replace the Spark Plugs on the Toyota Rush?
Toyota Rush (2017-2024 / J300, F800) To replace the spark plugs on the Toyota Rush, open the hood to access the components at the top of the engine block; here, next to the air filter bo…
How to Replace the Fog Light Bulb on the Toyota Rush?
How to Replace the Fog Light Bulb on the Toyota Rush?
Toyota Rush (2017-2024 / J300, F800) To replace the fog light bulb on the Toyota Rush, open the hood to access the components inside the engine bay. Specifically, disconnect the connecto…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos