Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota Yaris?

Model: Toyota Yaris MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

On the Toyota Yaris, reset the Service light by pressing and holding the DISP button located on the right side of the instrument cluster while the ignition is off. Continue to hold the button while inserting the ignition key into the ignition barrel and turning it to switch on the instrument cluster.

Keep the button pressed until the light resets completely after a few moments.

Once the light has been reset, you can switch off the instrument cluster and then turn it back on to verify the reset.


Updated on 9 November 2026 by ScegliAuto


Related tutorials

How do you reset the Service light on the Toyota Yaris Hybrid?
How do you reset the Service light on the Toyota Yaris Hybrid?
Toyota Yaris (2011-2019 / Xp130) In order to reset the Service light on the Toyota Yaris Hybrid, you will need to connect a diagnostic tool to the OBD port of the vehicle: this port …
How to reset the service light on the 2018 Toyota Yaris
How to reset the service light on the 2018 Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Today we will explain how to reset the service light on a 2018 Toyota Yaris on your own. To reset the light, we need to turn on the instrument panel …
How to Reset the Service Light on a Toyota Yaris?
How to Reset the Service Light on a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To reset the Service light on a Toyota Yaris, press and hold the ODO/TRIP button located at the bottom right of the instrument panel while it is off.…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos