Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time on the Toyota Auris

Model: Toyota Auris E150 - Years 2007-2012
Part: Clock

In a few simple steps, we will see how to set the time on the display of the instrument panel of the Toyota Auris. First of all, we get into the car and start up the instrument panel; then we press the button located on the left of the panel to access the settings menu, until we reach the "setup" option, as shown in the video. Now, entering the submenu, we will see the time setting option, where we will adjust the hour first and then the minutes; finally, we exit the settings menu to save the changes made, by pressing the same button.

Posted on 5 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to set the time in the Toyota Auris?
How to set the time in the Toyota Auris?
Toyota Auris (2007-2012 / E150) In this tutorial, you can see how to set the time in the Toyota Auris, a very simple operation to perform after the battery has been flat or when swi…
How to set the time on the Toyota Auris
How to set the time on the Toyota Auris
Toyota Auris (2018-2024 / E210) Today's guide will show you the steps to adjust the clock on the Toyota Auris, following the instructions below. First, get in the vehicle and turn o…
How to set the time and date on the Toyota Auris
How to set the time and date on the Toyota Auris
Toyota Auris (2007-2012 / E150) These short and simple steps will show us how to change the time and date of the Toyota Auris. First, we get into the car and turn on the dashboard; …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos