Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the 2017 Toyota Sienna

Model: Toyota Sienna Xl30 - Years 2010-2020
Part: Service warning light

To manually reset the oil light on your 2017 Toyota Sienna, simply follow the steps described below. First, get into the car and turn on the instrument panel, then locate the button below the speedometer and press it multiple times until the display shows "Trip A". At this point, you must hold down the same button used before and at the same time turn off and on the instrument panel. Finally, wait for the confirmation of the oil light reset and release the button.

Posted on 19 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Toyota Sienna
How to Reset the Oil Light on a Toyota Sienna
Toyota Sienna (2010-2020 / Xl30) To manually reset the oil light on your Toyota Sienna (2010-2020), carefully read the following guide and implement the steps described. First, enter…
How to reset the oil light on a 2012 Toyota Sienna
How to reset the oil light on a 2012 Toyota Sienna
Toyota Sienna (2010-2020 / Xl30) To correctly complete the manual reset of the engine oil light on your 2012 Toyota Sienna, you must follow the steps described in the following mini …
How to Reset the Maintenance Light on a 2008 Toyota Sienna
How to Reset the Maintenance Light on a 2008 Toyota Sienna
Toyota Sienna (2004-2010 / Xl20) To manually reset the maintenance light on the dashboard of your first-generation 2008 Toyota Sienna, follow these simple steps. First, park the car …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos