Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance light on a 2008 Toyota RAV4.

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

If you want to manually reset the maintenance light on your Toyota RAV 4 third generation (year 2008), you just need to carefully read the following procedure and follow each step one by one. First, get into the car, then insert the key and start the instrument panel.

At this point, locate the "ODO" button inside the tachometer and press it multiple times until "Trip A" appears on the display.

Once you've done this, turn off the ignition and turn it back on while holding down the same button you used earlier until the reset is complete.


Posted on 1 December 2025 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on a 2007 Toyota RAV4
How to Reset the Maintenance Light on a 2007 Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This video shows how to reset the maintenance light on your 2007 Toyota RAV4. To reset the light, first start the instrument cluster and ensure it is…
How to Reset the Maintenance Light on a 2018 Toyota RAV4
How to Reset the Maintenance Light on a 2018 Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) If you own a 2018 Toyota RAV4 and want to know the steps to correctly reset the maintenance light, follow the instructions provided. First, turn on t…
How to Reset the Maintenance Light on the 2015 Toyota RAV4
How to Reset the Maintenance Light on the 2015 Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Completing the manual reset of the maintenance light on your 2015 Toyota RAV4 involves a few simple steps that we will explain in this mini guide. Fi…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos