Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Service Light on Toyota Avensis

Model: Toyota Avensis T270, MK 3 - Years 2009-2018
Part: Service warning light

In a few simple steps, we will discover how to reset the tyre pressure warning light on the Toyota Avensis. First, get in the vehicle and start the instrument panel; using the trip button or trip computer, reset the trip meter by holding it down. Now turn off the instrument panel and hold the trip button while turning the panel back on; wait for the service light to reset, checking the progress on the display, and finally release the button.

Posted on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on the Toyota Avensis
Resetting the service light on the Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) Today we will see the information regarding the reset of the service maintenance light for the oil change (service) of the Toyota Avensis. First of a…
Resetting the Service light on the Toyota Avensis
Resetting the Service light on the Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) Once you have changed the oil in the Toyota Avensis, you need to reset the system that alerts you with a reminder on the dashboard about the need for…
Resetting the Service Light on the Toyota Avensis
Resetting the Service Light on the Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) Below are the step-by-step instructions on how to reset the service light for routine maintenance on the Toyota Avensis. First, get into the vehicle …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos