Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Oil Change on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Service warning light

See other generations:
Video tutorial

Today, let's see how to reset the oil change on a Toyota Yaris (2007-2011). Start the procedure by turning on the ignition of your vehicle, then press the trip button to the left of the speedometer until the TRIP A screen appears. Next, turn off the ignition.

Now, press and hold the trip button again and turn the ignition back on. You will see dashes "-" flashing on the screen and gradually disappearing. Continue to hold the trip button until all dashes disappear to complete the reset, then restart the vehicle.


Posted on 25 March 2026 by ScegliAuto


Related tutorials

How to change the oil and oil filter on a Toyota Yaris?
How to change the oil and oil filter on a Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) To change the engine oil on a Toyota Yaris, you need to access the underside of the car: here you will find the oil drain plug. Open it with a spanne…
How to Reset the Oil Service Light on a Toyota Yaris?
How to Reset the Oil Service Light on a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) Resetting the oil service light on a Toyota Yaris, as shown in this tutorial, is an extremely simple and quick operation. First, enter the cabin, the…
Resetting the Engine Oil Change Light on the Toyota Yaris
Resetting the Engine Oil Change Light on the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Let's discover the necessary information to reset the service light for the routine maintenance of the engine oil change on the Toyota Yaris. First, …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos