Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the oil and oil filter on a Toyota Yaris?

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil on a Toyota Yaris, you need to access the underside of the car: here you will find the oil drain plug. Open it with a spanner and place a container underneath to collect the used oil until it has completely drained.

Once finished, close the drain plug again. The oil filter is also located at the bottom of the car, near the engine compartment.

It should be removed from its housing by simply unscrewing it. At this point, you can replace it by installing a new filter.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Filter on a Toyota Yaris
How to Replace the Oil Filter on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) How do you replace the oil filter on a Toyota Yaris? Lift the car on a column lift and drain the used oil from the engine, then move on to removing t…
How to Remove the Oil Filter on a Toyota Yaris
How to Remove the Oil Filter on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) How to remove the oil filter on a Toyota Yaris? This is a simple operation if you follow the correct steps. Lift the car using a column lift or jack.…
Engine oil replacement in the Toyota Yaris 2
Engine oil replacement in the Toyota Yaris 2
Toyota Yaris (2005-2011 / Xp90) The video in question illustrates in detail how to change the engine oil, and the corresponding filter, in the Toyota Yaris 2. We open the engine oil…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 1999-2005 - How many liters of oil can be loaded on Toyota Yaris 1300 cc first series? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos