Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine oil replacement in the Toyota Yaris 2

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Engine oil

See other generations:
Video tutorial

The video in question illustrates in detail how to change the engine oil, and the corresponding filter, in the Toyota Yaris 2. We open the engine oil filler cap, so that it can flow more quickly, lift the front of the car and locate the oil pan. After placing a sufficiently large container underneath, we unscrew the oil pan plug and let the old engine oil drain away.

Meanwhile, we remove the old filter and replace it with a new one, making sure to grease the gasket well.

We close the oil pan plug, pour the new engine oil through the filler cap and measure the level. We are done!


Posted on 14 September 2025 by ScegliAuto


Related tutorials

Resetting the service light of the Toyota Yaris.
Resetting the service light of the Toyota Yaris.
Toyota Yaris (2011-2019 / Xp130) In this guide, we will see the steps that will allow us to reset the service maintenance reminder for the regular oil change of the Toyota Yaris. Fir…
How to Replace the Key Battery of a Toyota Yaris
How to Replace the Key Battery of a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Start by inserting the tip of a flathead screwdriver into the slot on the side of your Toyota Yaris key and lever it open. Then, detach and remove th…
Replacing the Starter Motor on a Toyota Yaris
Replacing the Starter Motor on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) The following steps will show how to disassemble and replace the starter motor on a Toyota Yaris. First, open the bonnet of the vehicle and disconnec…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 1999-2005 - How many liters of oil can be loaded on Toyota Yaris 1300 cc first series? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos