|
Do it yourself
| |||
| ||||
Oil change and filter for Toyota Yaris 1.3 petrol MK3.
Model: Toyota Yaris
Xp130
- Years 2011-2019
Let's see how to change the engine oil and filter of a Toyota Yaris 1.3 petrol version MK3: open the oil filling cap to facilitate draining, warm up the engine for 5 minutes, add detergent to the oil tank, such as Motul Engin Clean, which can be found on eBay with the code 375643454760 at a price of 17.50 euros, free delivery. Leave the engine idling for 15 minutes and then let it cool down. Lift the front of the car, remove the plastic protection under the engine, place a container under the drain plug and let it drain; then dispose of the used oil at an authorized center. The filter is accessible from the engine compartment; unscrew the cartridge, remove the gasket and clean the seat with brake cleaner. Install the new filter, lubricating the gasket with new oil, and screw it in by hand. Replace the new plug and gasket on the sump, reassemble the base and lower the car. Add about 90% of the oil recommended by the manufacturer through the top cap. Start the engine for 30 seconds to circulate the oil and fill the filter. Measure the oil level and add more until it reaches "max" without ever exceeding it.
Posted on 9 September 2025 by ScegliAuto
Video tutorial
Related tutorials
Toyota Yaris
(1999-2005 /
Xp10)
Replacing the air filter on the Toyota Yaris 1.0 petrol is very simple. First, open the bonnet and remove the four clips that secure the engine cover…
Toyota Yaris
(1999-2005 /
Xp10)
To change the engine oil on a Toyota Yaris, you need to access the underside of the car: here you will find the oil drain plug. Open it with a spanne…
Toyota Yaris
(2011-2019 /
Xp130)
To effectively change the oil filter on a Toyota Yaris III, first ensure you have everything you need: a new oil filter with the correct code 90915-Y…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.100
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |