Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Clock

See other generations:
Video tutorial

Watch this video to learn how to set the time on a Toyota Yaris. Turn on the instrument cluster using the appropriate remote key; press the button located above the instrument cluster (left side).

Hold the button until the numbers start flashing (in this case, the time). Adjust the new time while keeping the button pressed; set the minutes and date using the buttons on the left (confirm with the Set button).

Turn off and then turn on the instrument cluster again using the key. Double-check everything and turn off the instrument cluster after setting.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Set the Time on a Toyota Yaris 3
Toyota Yaris (2011-2019 / Xp130) .. In this short video tutorial, you will learn how to set the time on a Toyota Yaris third series by following these simple instructions. First, get.. …
How to Set the Time on a Toyota Yaris 1
Toyota Yaris (1999-2005 / Xp10) In this brief video tutorial, learn how to correctly set the time on the first series Toyota Yaris. First, get inside the vehicle and turn on the ign…
How to Set the Time on a Toyota Yaris?
How to Set the Time on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) .. In this tutorial, you will see how to set the time on a Toyota Yaris, an extremely simple and quick operation to perform if you have.. …

    Frequently Asked Questions

    • Yaris 2020-2027 - How to adjust the time in the Toyota Yaris Hybrid? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos