Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wipers on a Toyota Yaris?

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
Video tutorial

First, remove the rubber caps covering the bolts at the base of the wiper arms. Unscrew the bolts and, gently lifting the wiper blade, completely remove the support arm. Clean any rust or dirt from the nut attachment using appropriate lubricating sprays.

Now, reposition your new wiper, carefully reversing all the steps taken so far: then reattach the nut that secures the base of the wiper, replace the rubber caps, and the job is finished!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on a Toyota Yaris
How to Replace the Wiper Blades on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) To replace the wiper blades on your Toyota Yaris, lift the blades away from the windscreen by raising the wiper arm vertically. Once the blades are d…
Where is the windscreen wiper fuse on the Toyota Yaris?
Where is the windscreen wiper fuse on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) The fuse that controls the operation of the windscreen wipers on the Toyota Yaris is located in the fuse box at the lower left of the dashboard, next…
How to change the wipers on a Toyota Yaris
How to change the wipers on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Let's see how to replace the wipers on your Toyota Yaris using today's video tutorial. The operation is very simple and can be done independently in …

    Frequently Asked Questions

    • Yaris 2011-2019 - Can I replace the ignition switch on my Toyota Yaris myself? and how much is it? Read answer
    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos