Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the Toyota RAV 4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Clock

Setting and adjusting the clock on the Toyota RAV 4 is undoubtedly one of the simplest and quickest tasks you can perform. There is no need to consult an expert, and you can do it entirely on your own. First, turn on the car and navigate through the menu using the directional arrows on the right side of the steering wheel. Scroll right until you find the settings menu. Then, enter "Clock" and manually set both the hour and minute digits. Once finished, go back and exit the menu. The operation is complete.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time on the 2016 Toyota RAV4
How to adjust the time on the 2016 Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To set the time on the 2016 Toyota RAV 4, we need to: - turn on the vehicle's instrument panel without starting the car; - turn on the onboard comput…
How to Set the Time on the Toyota RAV 4
How to Set the Time on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) This guide will show you how to set the correct time and date on the Toyota RAV 4 in simple and quick steps. First, get in the vehicle and turn on th…
How to set the time on the Toyota RAV 4
How to set the time on the Toyota RAV 4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) In this guide, we will see the instructions that will allow us to set the time on the display of the Toyota RAV 4 dashboard, following the instructio…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos