Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to locate the fuse box of a 2008 Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuse box

See other generations:
Video tutorial

In this video, we show you how to locate the fuse box of a 2008 Toyota Yaris. Open the bonnet and look at the far right in the upper corner.

There is a black plastic box containing the fuses. Remove the cover to access the fuses.

Generally, the fuse diagram is found inside the cover. Now move inside the cabin and look in the drawer located immediately at the entrance next to the door.

Inside the compartment, there is another set of fuses connected to other functions of the vehicle.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

Fuse Positioning and Diagram for the Toyota Yaris
Fuse Positioning and Diagram for the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) This guide will show you the positioning and diagram of the fuses for the Toyota Yaris, in simple steps. First, open the bonnet of the vehicle and lo…
How to open the external fuse box of the Toyota Yaris
How to open the external fuse box of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today we will see how to access the external fuse box of the Toyota Yaris. First, we open the car's hood and locate the fuse box, which is located at…
Fuse Diagram and Schema for the Toyota Yaris
Fuse Diagram and Schema for the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Today's instructions will illustrate the positioning of the fuse boxes in the Toyota Yaris, retrieving the schema and diagram of the fuses. First, op…

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos