Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light on the Toyota Rav4

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part: Fog lights

To replace the front fog lights on this vehicle, follow the instructions in this description and refer to the images in the video. First, remove the inner wheel arch by unscrewing the securing nuts. This will give you access to the back of the light. Next, unscrew the fixing screws from the bumper and disconnect the electrical connector. After doing this, take the new light and position it in its housing. Then, reattach the fixing screws and reconnect the connector.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Headlight Bulbs on a Toyota Rav4
How to Remove the Headlight Bulbs on a Toyota Rav4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and s…
How to install the rear fog lights on the Toyota RAV 4?
How to install the rear fog lights on the Toyota RAV 4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To install the rear fog lights on the Toyota RAV 4, loosen the screws securing the rear bumper to its housing: these screws will be found at the bott…
Replacing Front Fog Light Bulb for Toyota Rav4
Replacing Front Fog Light Bulb for Toyota Rav4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Today, learn how to remove and replace the front fog light bulb on a second generation Toyota Rav4 by following these simple instructions. First, rem…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos