Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How to easily set the Toyota Rav 4 clock

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 MK 5, Xa50 - Years 2019-2024
Part: Car stereo
Operation: How to easily set the Toyota Rav 4 clock

Changing the Toyota Rav 4 time settings is really simple and can be done by anyone without the intervention of an expert in the field. First, go inside the vehicle and start the car. Immediately afterwards, also turn on the radio and press the "Menu" button located to the left of the display. Immediately after, press on the icon "Setup" and "Clock". Within this menu you can select the geographical area you belong to (useful for setting the automatic time zone), the time format (12 hours or 24 hours). By activating the setting that allows you to set the time based on your GPS position, you don't have to do anything manually. While, if you deactivate this option, you will have to click on the time and manually set the hours and minutes digits. Once finished, you can exit the menu.


Posted on 3 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Rav 4 2006-2013 - What problems does the Toyota Rav 4 radio have? Read Answer
    • Rav 4 2006-2013 - How to reset the car radio of the Toyota Rav 4? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos