Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Warning on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Service warning light

See other generations:
Video tutorial

To reset the expired service reminder on the car, no special tools are required; the car is designed to perform the reset itself when the oil change is done. First, insert the key into the ignition and turn it to activate only the instrument panel.

Then press the trip meter button to display the mileage and turn off the ignition. Press the trip reset button again and, while holding it down, turn the ignition key to activate only the instrument panel.

At this point, the service reminder light should turn off.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

Resetting the Service Warning on a Toyota Yaris
Resetting the Service Warning on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In a few simple steps, let's see how to reset the service warning for routine maintenance (oil change) on a Toyota Yaris. First, get into the vehicle…
Resetting the service light of the Toyota Yaris.
Resetting the service light of the Toyota Yaris.
Toyota Yaris (2011-2019 / Xp130) In this guide, we will see the steps that will allow us to reset the service maintenance reminder for the regular oil change of the Toyota Yaris. Fir…
How to Reset the Tyre Pressure Warning on the Toyota Yaris
How to Reset the Tyre Pressure Warning on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Let’s discover the information related to resetting the tyre pressure warning on the Toyota Yaris; before resetting the TPMS sensors, ensure that all…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos