Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning on the Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part:

Let's discover the information related to resetting the tire pressure warning of the Toyota Yaris; before resetting the TPMS sensors, it is necessary that all four tires are at the correct pressure. Then, we get into the car and start the ignition; then, we press and hold the reset button located at the bottom on the driver's side, above the pedals, as shown in the video. At this point, we wait for the TPMS warning to reset correctly on the instrument panel display, turning off the ignition and starting the engine!

Posted on 29 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning on the Toyota Yaris
How to reset the tire pressure warning on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) These short and simple instructions will show us how to reset the tire pressure warning of the Toyota Yaris; before resetting the TPMS sensors, it is…
How to restore the tire pressure warning on the Toyota Yaris
How to restore the tire pressure warning on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Below we will discover the information that will allow us to reset the tire pressure warning of the Toyota Yaris; before performing the reset of all …
How to reset the tire pressure warning light on the Toyota Yaris.
How to reset the tire pressure warning light on the Toyota Yaris.
Toyota Yaris (2011-2019 / Xp130) These brief and simple steps will illustrate how to reset the tire pressure warning for the Toyota Yaris. Before performing the reset of the TPMS sen…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What to do in case of tire warning light on Toyota Yaris? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos