Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Footwell Lights on the Toyota Yaris MK4

Model: Toyota Yaris MK 4 - Years 2020-2026
Part: Checks and maintenance

Let's see how to easily install a nice accessory: footwell lights. In this case, we will only see it from the passenger side, but it can also be fitted on the driver's side: these are original Toyota parts, which we found for example on toyotaparts.mcgeorgetoyota.com for £11.50 each. The part number is 81080-33280, different from the one shown in the video. We need to remove the panel located under the glove compartment, held by three clips. The connectors are already prepared for attaching the LEDs; they are one-way connectors, so it's impossible to get it wrong. There is already a housing for it on the back of the panel, on both sides. Refit the panel in place and test it; it should work perfectly.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Toyota Yaris?
Where are the fuses located in the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) Each of the fuses of the Toyota Yaris has the function of regulating the operation of a device that is installed on the car: in this type of vehicle …
Where to Find the Fuses in a Toyota Yaris
Where to Find the Fuses in a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Each of the fuse boxes installed in the Toyota Yaris contains the fuses used in the vehicle. In this type of car, you will find two fuse boxes. The f…
How to Install the Tow Bar on the Toyota Yaris
How to Install the Tow Bar on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Today's instructions will show you how to install the rear tow bar on the Toyota Yaris. To install the tow bar, first remove the rear bumper by unscr…

    Frequently Asked Questions

    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer
    • Yaris 2005-2011 - Where is the 2010 Toyota Yaris jack located? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos