Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Toyota Yaris Hatchback

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

If you notice that a rear light bulb is not functioning and you want to replace it yourself, follow the instructions and steps outlined below for safe procedure. After opening the boot, use a sharp object to pry off the rear panel corresponding to the light unit.

Underneath, you will find the lamp holders; unscrew the bulb holder and then remove the bulb to replace it with the new one. Then, reassemble all components in reverse order.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on the Toyota Yaris Hatchback?
How to Replace the Headlight Bulb on the Toyota Yaris Hatchback?
Toyota Yaris (2020-2026 / MK 4) To replace the headlight bulb on the Toyota Yaris Hatchback, open the bonnet to access the interior of the corresponding headlight. Here, disconnect …
Replacing the Rear Headlamp Bulb on a Toyota Yaris
Replacing the Rear Headlamp Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Today, learn how to remove and replace the rear headlamp bulb on a first-generation Toyota Yaris. First, open the boot and remove the plastic side co…
How to Replace the Number Plate Bulb on a Toyota Yaris
How to Replace the Number Plate Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video, see how to replace the damaged number plate bulb fitted on a Toyota Yaris. Use a screwdriver to remove the number plate light unit loc…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos