Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : How to replace the turn signal indicator located on the Toyota Yaris rearview mirror

Toyota Yaris - Video tutorial

Model: Toyota Yaris MK 4 - Years 2020-2024
Part: Light bulb
Operation: How to replace the turn signal indicator located on the Toyota Yaris rearview mirror

With the help of the following video tutorial, we will explain how to replace the turn signal bulb located on the external rearview mirror of the Toyota Yaris. The first thing to do is to remove the cover of the external mirror, to do this you just need to pull it gently. Then we remove the spotlight, pulling it outwards and then disconnect the connector to remove the bulb. Once the bulb is removed, insert the new one and reassemble the spotlight. Finally, reattach the cover of the mirror. Test the operation of the turn signal before hitting the road.


Posted on 2 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Yaris 2020-2027 - Why don't my Toyota Yaris rear fog lights and reverse lights work? Read Answer
    • Yaris 2005-2011 - What to do if the lights on Toyota Yaris do not work? Read Answer
    • Yaris 2011-2019 - Where is the parking light fuse located in the Toyota Yaris? Read Answer
    • Yaris 2020-2027 - Which rear position light bulb to fit on the Toyota Yaris? Read Answer
    • Yaris 1999-2005 - How do I change the sidelight bulb on the 2002 Yaris? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos