Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : How to change the position of the rear view mirrors of Toyota Yaris 3

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Outside rearview mirror
Operation: How to change the position of the rear view mirrors of Toyota Yaris 3

If you want to manually change the position of the exterior mirrors mounted on your Toyota Yaris Mk3, all you have to do is read carefully our new mini guide and put the steps described into practice. First insert the key and turn on the instrument panel only. Then move to the left side of the dashboard and locate the "Mirror" button. Immediately above you will also find the two small buttons "L" (for the left mirror) and "R" (for the right mirror). Once the mirror is selected, use the directional arrows of the "Mirror" button to change its position.


Posted on 23 June 2022 by ScegliAuto

    Frequently Asked Questions

    • Yaris 2005-2011 - How do you replace the wing mirror cap on the 2008 Toyota Yaris? Read Answer
    • Yaris 2011-2019 - How much does it cost to replace the exterior mirror on the Toyota Yaris? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos