Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Maintenance Reset on Toyota Avensis 2009

Model: Toyota Avensis T270, MK 3 - Years 2009-2018
Part: Warning light – error code

Thanks to this brief video guide, you can see the entire operation necessary to perform the maintenance reset on your Toyota Avensis, third generation model produced from 2009 onwards. First, turn on the vehicle's ignition, then press the trip button to the left of the speedometer until "TRIP A" appears on the display, and then turn off the ignition. Once done, press and hold the trip button again and turn the vehicle's ignition back on. Finally, wait a few seconds with the button still pressed until the maintenance reset is completed, as shown in the video.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset maintenance reminder (service) on the Toyota Avensis.
Toyota Avensis (2003-2008 / T250, MK 2) Today we will see the process of resetting the regular maintenance reminder for the engine oil change of the Toyota Avensis. First of all, we get int…
How to Reset the Oil Light on Toyota Avensis
How to Reset the Oil Light on Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) In this video tutorial, you can see how to reset the engine oil management system on a Toyota Avensis. The first step is to perform vehicle maintenan…
How to Reset the Maintenance Light on the Toyota Avensis
How to Reset the Maintenance Light on the Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) In this brief guide, you will discover the instructions to reset the maintenance light for the regular oil change on the Toyota Avensis. First, get i…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos