Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Light on a Toyota RAV4?

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part:

In this tutorial, we will see how to reset the tyre light on a Toyota RAV4, a very simple and quick operation. Before proceeding, ensure that you have restored the correct pressure for each tyre according to the instructions in the manual. Start by turning on the instrument panel, then using the directional arrows on the left side of the steering wheel, scroll through the screens to the right until you reach the settings menu. Next, enter "Vehicle settings", select "TPWS", and perform the reset using the "Set pressure" option.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disable the Airbag in the Toyota RAV4?
How to Disable the Airbag in the Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this brief tutorial, we will see how to disable and re-enable the passenger airbag in the Toyota RAV4, a necessary operation according to the high…
How to reset the Service light on a Toyota Rav4?
How to reset the Service light on a Toyota Rav4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) To reset the Service light on a Toyota Rav4, turn on the ignition by double-clicking the appropriate button to the right of the steering wheel. Then,…
How to Reset the Service Light on a 2019 Toyota RAV4
How to Reset the Service Light on a 2019 Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) Let's see how to turn off the service light after an oil change on a Toyota RAV4 MK5: turn on the instrument panel and use the left/right directional…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos