Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Triumph Tiger 900
Part: Engine

In order to disassemble the engine of the Triumph Tiger 900, you need to loosen the screws that fix the block to its housing in the center of the frame: once the block has been released, you will need to disconnect the screws that fix the manifolds and also disconnect the connectors. At this point, it will be possible to remove the cylinders from the top of the engine block: the pistons must then be freed from the connecting rods, removing them from the crankshaft so that it can be replaced along with other components. Finally, you can reassemble the engine and check that it functions properly.

Posted on 2 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Triumph Tiger 900?
How to replace the engine oil in the Triumph Tiger 900?
Tiger 900 In this tutorial we can see how to replace the engine oil in the Triumph Tiger 900, an extremely simple and fast operation. First of all, we wait for…
How to Remove and Install the Rear Wheel of the Triumph Tiger 900
How to Remove and Install the Rear Wheel of the Triumph Tiger 900
Tiger 900 This guide briefly provides the instructions to remove and install the rear wheel of the Triumph Tiger 900. First, place your motorcycle on the centr…
How to Replace the Air Filter on Triumph Tiger 900 (2021)
How to Replace the Air Filter on Triumph Tiger 900 (2021)
Tiger 900 In this short video, we will see the steps that will allow us to remove and replace the engine air filter on a 2021 Triumph Tiger 900. First, remove …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos