Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil of a Triumph Tiger 900, follow these steps. First, make sure the engine is cold. Lift the motorcycle on a central or side stand to stabilize it. Find the oil drain plug on the engine casing and the oil fill plug on the oil tank. Place a collection container under the drain plug. Use a wrench to loosen the drain plug and let the used oil drain completely. Once drained, remove and check the oil filter. Replace it if necessary. Lubricate the seal of the new filter with new engine oil and install it. Tighten the drain plug to the correct torque. Pour the new oil into the oil tank using a funnel until reaching the correct quantity, as indicated in the owner's manual. Close the oil fill plug at this point, and you will have completed the replacement.

Posted on 25 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Triumph Tiger 900?
How to Reset the Service Light on the Triumph Tiger 900?
Tiger 900 The procedure to reset the Service light on the Triumph Tiger 900 requires the use of a diagnostic tool: this must be connected to the OBD port locat…
How to Reset the Service Light on a Triumph Tiger 900?
Tiger 900 To reset the service light on the Triumph Tiger 900, loosen the screws securing the seat: once removed, you will find the OBD port underneath, which …
How to replace the engine oil in the Triumph Tiger 900?
How to replace the engine oil in the Triumph Tiger 900?
Tiger 900 In this tutorial we can see how to replace the engine oil in the Triumph Tiger 900, an extremely simple and fast operation. First of all, we wait for…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos