Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine oil of the Triumph Speed 400?

Model: Triumph Speed 400
Part: Engine oil

Video tutorial

To replace the engine oil of the Triumph Speed 400, you need to loosen the drain plug of the oil pan, which is located in the central lower part of the motorcycle: once this plug has been loosened, it will be possible to drain all the used oil into a container.

Once the engine oil has been drained, you can remove the oil filter, located on the lower left side: to remove it, you will need to loosen the screws of the cover.

Finally, you can top up the oil by pouring it through the vent on the right side of the motorcycle.


Posted on 15 April 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Triumph Speed 400?
How to Change the Engine Oil in the Triumph Speed 400?
Speed 400 In this tutorial, you will see how to change the engine oil in the Triumph Speed 400, a very simple and quick operation. First, ensure the engine is …
How to Change the Engine Oil on the Triumph Speed 400?
How to Change the Engine Oil on the Triumph Speed 400?
Speed 400 You can change the engine oil on the Triumph Speed 400 by loosening the drain plug located at the bottom centre of the vehicle: once the plug is remo…
How to Change the Engine Oil of a Triumph Speed 400?
How to Change the Engine Oil of a Triumph Speed 400?
Speed 400 To change the engine oil of a Triumph Speed 400, ensure the engine is cold. Lift the bike onto a stand for stability. Remove the oil filler cap from …

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos